In this post, I am sharing with you, a sewing tutorial on how to make a simple tote. A tote with an exterior made of selvedges. Throwing out bits of fabrics has always been hard for me. Even the littlest or the tiniest let alone the selvedges, long strips of fun text with a bit of the fabric itself. Some have really cute colour codes which make it even harder to throw out. So I decided to keep them, hoping some day I will get to use them in a string quilt like this,this or this.

Sewing tutorial tote bag from selvedges

Products from Amazon.com

 

bundle of selvedge

But in the meantime, I just like to see them used in a simple quick project. So I made a tote out of some of them.

I have them in different sizes, mainly because they are left overs and sometime I need to use the fabric as much as near the edge but I still keep the selvedge because of the texts.

selvedge pressed

Here is the sewing tutorial for the selvedge tote, so you can go make one too!

Sewing Tutorial for Tote Bag using Selvedges

There are affiliate links in this post for your convenience. Please find my full disclosure here.

You can make any size you want, but here I will give out the size I use for mine.

Material Requirements:

  • A pile of selvedges. It will be easier to have long ones, longer than the width of the tote. Otherwise, you may patch them beforehand to make them long enough.
  • or use this , slightly larger than the size of your tote (I use 2 pieces of 15 x 18″)
  • half yard of lining fabric
  • a fat quarter for the interior pocket
  • a pair of straps, (I use an old overall straps for mine)
    • you can also make one using 4 strips of 2 x 40″ fabric –  place two strip right sides together, sew all around leaving a 3″ gap for turning right side, Turn right side out, press and top sticth all around the sides. Make a pair.
    • or you can simply use this
    • or you can also use premade leather

Products from Amazon.com

Piecing Instructions

1.First, you will need to piece and quilt as you go the exterior pieces. Sew the selvedges onto the batting covering the raw edges with the neighboring non-fraying edge.

sew

2. If the selvedge finish edge is one of those fray finish, you may put the selvedge right side together and sew rough edges together and flip open.

more sewing

3. Continue until the batting is filled. Do the same for the other piece.

4. Trim the piece to size, 14″ x17″ with a curvy bottom corners

5. Cut the same 2 piece for the lining from the lining fabrics

trim to size

6. Remove about a 1/4″ of batting from the top side of the piece. I like to do this to avoid bulk later on when sewing the top side.

7. Cut out 15 x 10″ out of the pocket fabric. Fold in half with right sides facing, so that it now measures 7.5 x 10″. Sew all the way around and leave a small opening for turning right side out. Press and top stitch the edges.

8. Place onto one of the lining piece. Center it out. I put mine about 7″ away the top edge. Sew onto the lining piece on the 3 sides leaving the top side open so that this will become the pocket. You can also stitch the middle down, so that you can have two smaller pocket instead.

Products from Amazon.com

lining and pocket

9. Place the strap 3″ away from the sides, and the end of the strap should be 7″ from the top. Mark a line 1 1/2″ and 2 1/2″ away from the top.(I use to do this as in the photo). This is where I make the square with an X.

10. Pin and sew the strap onto the exterior piece.

sew the strap

11. Place the two lining piece right side together and sew the sides and the bottom leaving the top side open. Turn right side out. Clip the corners carefully not to snip the stitches

12. Place the exterior piece right sides together and sew the sides and the base leaving the top side open.

put lining in

13. Now place the lining piece inside the exterior piece right sides together. make sure the straps is put inside too.

14. Pin and sew the top edge, leaving a gap for turning right side out.

sew to edge

15. Turn right side out. Press well and top stitch the top seam, closing the gap as you go. Press well.

It’s done. Enjoy!

How to sew tote bag using selvedge
frinish totefrinish tote 2

Products from Amazon.com

How to sew tote bag using selvedge : Free tutorial on the blog, step by step

Hope you enjoy the tutorial! Make sure you pin it to your pinterest board!

How To Sew Selvedge Tote Bag

Selvedge Sewing Tutorial

 

12 Comments on Sewing Tutorial : Simple Tote from fabric selvedges (selvage edges)

  1. This is fabulous! I have a collection of selvedges that I’ve been hording for a quilt as well, but this looks like a fun way to use them and see them all the time. Thanks for sharing! 🙂

Leave a Reply to Vera Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.